How To Configure Printers On Linux With Cups [Guide]

Getting a Printer to work on Linux is more difficult than it is on other operating systems. The reason for this is that not all printers have driver support for Linux. Additionally, each desktop environment handles printers differently, so there’s no universal set of instructions for users to follow. Luckily, there’s an easy way to configure printers on Linux; the Cups printing system. It’s an open source tool that Apple develops. With it, adding printers to Linux is a piece of cake!

Install Cups

Pretty much all printing on Linux happens with Cups. You may already have this software installed on your Linux PC. However, this isn’t true 100% of the time, so it’s safe to go through the installation process anyway. Open up a terminal and follow the commands to get it working depending on your Linux distribution.


sudo apt install cups


sudo apt-get install cups

Arch Linux

sudo pacman -S cups


sudo dnf install cups -y


sudo zypper install cups

Generic Linux

Need to use Cups but can’t install it on your Linux OS the easy way? Don’t worry! The source code for the software is on Github. To install it, read through this page. Learn what dependencies you’ll need for it to build correctly. Then, when all of the dependencies are taken care of, open up a terminal and use the Git tool to clone the latest release.

git clone

Using the CD command, move the terminal into the cups sources folder.

cd cups

Run the configure command. Using configure generates all the necessary items for Cups to build. It will also check for dependencies, and see if the building environment is set up correctly. DO NOT SKIP THIS STEP!


Let the configure scripts run and set up the development environment. If the scripts don’t run into any errors, it’s safe to start the compilation. In the terminal, run the make command.

‘); if (navigator.appVersion.indexOf(“Mac”)!=-1) document.write(”);


Cups takes a long time to compile, especially on Linux PC’s that don’t have a lot of performance power. When the compilation is done, use the test command to check the software and determine that it works.

make test

Finally, after running the test, install Cups to the system with:

sudo make install

Add Printers

The Cups printing system on Linux is pretty automatic — if you have a printer that has native Linux support. However, if the Linux operating system you’re using doesn’t have a built-in driver for Linux, Cups isn’t going to see it, and nothing will work.

Generally, a good workaround for printing on Linux is to find out if your printer supports working over a network. That way, if the manufacturer refuses to support the Linux platform, it won’t matter and you’ll be able to use it with Cups anyways.

To add a printer, open up a web browser and load up the Cups web interface.


In the Cups web interface, click on the “Administration” tab at the top of the page. Alternatively, look for “Cups for Administrators,” and select the “Adding Printers and Classes” button to go to the printer management area.

Local Printers

Need to add a local printer? Start out by turning it on, and plug it into your Linux PC. Ensure that Linux detects it as a device, by entering the following command into a terminal:


If the printer shows up as a device in lsusb, your OS should support it. Return to the Cups printer admin area and click the “find new printers” button. Selecting this option is best as it allows Cups to scan your system for any printers (locally, and on the network).

Let Cups scan for devices. When the scan is complete, it will print out a list of available printers. Next, to each printer it finds, you’ll see an “Add This Printer” button. Click it, and add your printer to the Cups system.

Network Printers

Cups is quite good at detecting compatible printers, even network ones. If you know the exact network IP address of your network printer, click the “Add Printer” button, scroll down to “Other Network Printers,” and specify the address. Otherwise, select the “Find New Printers” button and allow the software to detect it automatically.

After letting Cups detect printers, click the “Add This Printer” button next to your printer in the interface.

Printing A Test Page

Now that your printer is working with Cups, it’s time to print out a test page, to confirm that you can print. Open up your application menu, type “printers” and open it.

Gnome/GTK Instructions

Use Gnome or a desktop environment that makes use of the Gnome printer app? Follow these instructions to print a test page.

Step 1: open up the printer app by searching for “printers” in activities, or the settings area.

Step 2: look for the printer you added in Cups and select it in the menu.

Step 3: find the “print test page” button and select it to start printing a test page.

KDE Instructions

Are you a KDE Plasma user? If so, follow these instructions to learn how to print out a test page.

Step 1: open up the Plasma app menu and search for “Printers”.

Step 2: in the Printers app, select the printer you added to Cups.

Step 3: click the “maintenance” button and select “print test page”.

Rate this post
About Alex Miller 12814 Articles
Alex Miller is a bestselling Tech author currently working here. His work has received a lot of appreciation from users and is being made to work hard to meet the user's expectations.

Be the first to comment

Leave a Reply

Your email address will not be published.